There’s a general understanding amongst gearheads that no matter how big one’s garage or storage space, it’ll eventually fill up. A two car garage will be just as full as a single, while that 40’ x 40′ unit your neighbor is building will be filled to capacity by year’s end. It’s just the natural order of things.

And before you get yer knickers in a knot, we’ll be doing a separate post about storage cabinets and workbenches. This list is simply about shelves – and trust us, you need more of them than you think. Your author is partial to shelves that hang from the ceiling to keep floor space free, but those that rise from floor to ceiling have their place as well. It’s always a good idea to mount these securely – especially the ones hanging from the rafters.

Just make sure to sell that box full of parts in the corner which fit a car you haven’t owned in a decade, ok?

True to his word, this author is kicking off with a product he would actually buy. This garage shelving will keep your gear off the floor, freeing up space for what’s supposed to be in the garage – cars. Suspended by robust angle iron, the whole unit weighs over 40 pounds, so make sure the brackets are securely fastened into a roof joist and not just the gypsum or ceiling tile.

A 22-inch to 40-inch ceiling dropdown provides up to 60 cubic feet of storage space depending on how closely you mount this thing to the ceiling. Surface dimensions are three feet by six feet, making it ideal for organizational tools like Rubbermaid containers but also suitable for those boxes of junkyard parts you keep meaning to sort through.

Looking for all the world like a chip rack hauled straight out of a rural general store, this shelving system from the House of Bezos mixes wire platforms with plastic endcaps. It’s available in a couple of different colors and with or without casters (we’d bin them for stability).

Amazon says it’ll bear about 1,750 pounds of evenly distributed weight, meaning you can’t park the kid’s dirt bike on it so don’t even try. Creating vertical space is never a bad idea and this shelf will certainly get the likes of gas cans and toolboxes off the floor.

Yes, this is a specific-use shelf … but it’s still a shelf. It’s also the one residing on the wall of my garage holding a quartet of 18-inch mud tires for the truck. Adjustable in width, this unit can hold a range of tire sizes and is good for about 300 pounds in total.

Installation requires it to be securely bolted into wall studs, not to mention the need for it to be level. After all, tires are round and can roll away. If you’re confident with those skills, this rack is easy to set up and folds away when not in use.

This handy pegboard is now offered in more colors than the vast majority of cars on sale today. In fact, there are no fewer than 35 hue combinations when considering both the backboard and shelf options. It all makes for a good way to organize tools and other garage necessities. The advantage of having tools on display is twofold: they’re at hand and you can show them off. Doesn’t do anything for theft prevention, though.

This is a metal pegboard, purported to be many multiples stronger than one hewn from traditional materials. This also means it’s magnetic. Three 16 in x 32 in Black powder-coated pegboard panels combine for a total tool storage area of 48 in x 32 in which will accommodate many pegboard hooks.

Similar in concept, if not spirit, like the ceiling-mounted shelves listed at the beginning of this list, are these wall-mounted units. Offered by the same company as those roof hangers, these units provide a surface measuring two feet by six feet. There are a pair of shelves in the pack.

Supported by multiple wall hangers and a robust crossbar, these shelves are listed as being able to bear “up to 400lbs total”. We will err on the side of caution and assume that figure refers to both shelves, putting capacity at 200 pounds apiece. We recommend you do the same. High-quality screws are provided in the kit; make sure to mount the supports for these shelves into wall studs lest the works of it come crashing down with the grace of a drunk elephant.

Yeah, ok – technically not a shelf. But these hooks and hangers provide the same benefit of getting your crap up and off the garage floor by creating space on which to hang items like ladders, shovels, and even some larger tools. When properly installed, these hooks can apparently hold better than 75 pounds each.

A dozen hooks are included in this pack, arriving in five sizes from flat arms over a half-foot deep (perfect for a ladder) to curved hooks that’d be ideal for holding a big hammer or mallet. Each hanger hook provides 2 types of screws for use on wooden, brick or concrete walls.

Part of a larger storage system, this RhinoMini shelf is intended as a universal wall-mounted design that does not compromise your ceiling. If you think that to be an odd statement, then you’ve never witnessed the devastating hack jobs that some people do installing those hang-from-above shelving systems.

RhinoMini is available in a ton of sizes, ranging from just 4 feet long to nearly 20. The seller describes them as “economical, strong, and attractive”, adjectives that have also been used to describe your author but you’ll have to guess which ones.

Fancy yourself a bit of a carpenter? On good terms with the crew down at the building center? Then this may be a good option. Essentially, the seller is providing the end caps and hardware to create a shelving system. Getting the lumber itself is your job. These days, with lumber in demand and prices stretching into the stratosphere, that may be easier said than done.

Nevertheless, the end caps in this kit made of heavy-duty industrial resin which permits the construction of strong, custom-sized shelves after you’ve picked up a few lengths of 2×4 lumber. Once joined with the wood, each shelf can apparently support spans up to 8 feet in length. Finished shelf depth is 16 inches.

What is the best shelving for a garage?

Every garage is different and so does the spare floor space it has. Therefore, when talking about shelving, the storage that is best for one garage might not be a good choice for another.

For instance, you may not have enough room for floor shelving but the items you want to store are heavy. In such a case, overhead garage storage would be the right selection. Likewise, if the items are light in weight, you can go for wall shelves that have no legs and can be installed directly on the wall.

Listed below are a couple of options that you may find suitable according to your garage’s real estate:

This one can be installed on the roof and can hold up to 270Kg (600lbs) of weight. The storage has 6 vertical posts for a strong grip. However, the shelving cannot be fixed to a metal ceiling/roof.

Shipped in a pack of 2, these wall shelves don’t need floor space and can be installed directly on any of the walls of the garage. Each of these can hold up to 68Kg (150lbs) of weight.

A standard storage shelving with 5 shelves, where each shelf can hold up to 118Kg (264lbs) which makes the total capacity of up to 590Kg.

Is it cheaper to buy or build garage shelves?

It is always cheaper to build garage shelves as compared to going for the readymade ones. In addition, tailored shelving matches your exact needs and you also get to choose the material of your preference which makes the setup last longer

How deep should garage shelves be?

Ideally, a 16” depth is appropriate if you want to store large items. As for the smaller ones, it would be good to have a 12” deep shelving.

How do I hang shelves in my garage?

You can follow the simple procedure that is given below to install storage shelves in your garage:

From time to time, TTAC will highlight automotive products we think may be of interest to our community. Plus, posts like this help to keep the lights on around here. Learn more about how this works.

(Editor’s note: This post is meant to both help you be an informed shopper for automotive products but also to pay for our ‘90s sedan shopping habits operating expenses. Some of you don’t find these posts fun, but they help pay for Junkyard Finds, Rare Rides, Rental Reviews, and whatever else. Thanks for reading.)

[Main Photo Credit: urfin/Shutterstock.com. Product images provided by the manufacturer.]

Avoid the cheap plastic shelves they sag over time :(

I’ve been doing a fair amount of researching and not a lot of actual doing for the last 6 months or so when it comes to garage and tool organization.

Still haven’t really decided but one thing that has popped up several times and I really think I’m gonna try to do is…. get all the shelving wall mounted and off the garage floor.

Basically makes it really easy to sweep or spray out the entire garage floor. And the few larger items you can’t really get up off the floor, like say, a push mower, you can tuck them under the wall-mounted shelving.

That’s all I got.

I see what my inventive neighbors do. I see some people after renovation, take the old kitchen cabinets and hang in the garage.

I bought some 2x4s and some cheap 4x8s, some metal brackets, and built shelves I can’t fill. They are off the ground and I was climbing them. So, they can handle a lot of weight.

Have some time? Any carpentry skills? If so, do what I did – make your own. I made a continuous solid-surface workbench on one side. I made a center stack of drawers for all my mechanic’s tools under that surface in the center. No dovetails here; solid wood and primitive but strong joinery techniques. To the left and right are sets of double doors that have deep cavities – perfect for the extra generator, car wash stuff, charcoal bags. The top shelves are open cabinet boxes to the left and right of the window. Car care stuff, oil, service manuals, etc all live here. Total cost about $700 in materials (good drawer slides are expensive) but I use every bit of space.

If you can find lumber. Currently in Southern Ontario at least there is a shortage. The large home builders are getting first choice. Lots of deck and fence projects currently on hold.

#8 – four 2x4s assembled side to side do not make 16 inches, but 15 inches. The manufacturer is making a shelf depth claim based on ignorance of the true dimensions of lumber.

Well, I’d rather go for the more affordable ones. They do not come cheap like they used to.

I put the Wall Control steel pegboard in 2 closets and I like it a lot. Great flexible organizing. I also use certain components of the Rubbermaid Fast Track garage system, but indoors. Double-track shelving systems have certain things that are universal and certain things that are proprietary, and I’ve learned a few tricks of what mixes and matches.

Storage tips: a) A double row of storage bins like those shown on the shelf in “#7” is incredibly useful for ‘things which you don’t use very often but should be all packaged up together’ [for example, handheld airless sprayer with its accessories and instructions]. Mount them up high (because you aren’t accessing them on a daily basis) and label one end. (My version uses old printer paper boxes and is made of wood, but you are more successful than me.) b) The Sterilite 6-Quart ‘squared-off’ containers (“shoebox” size) can be stacked about 4 high and are very useful for storing ‘grouped’ items (“Power Strips”, “RCA Cables”, “Zip Ties”) – again, label one end. The ‘square’ ones are available at Dollar General for a buck each (the ’rounded’ ones at Walmart are completely the wrong shape – too small inside and don’t stack reliably).

I got this for my wife to put her plants on:

https://www.amazon.com/gp/product/B0189K14W0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Impressively sturdy, not too hard to put together, and mostly very nice hardware. Not that cheap though.

This is actually a timely one of these, as I need to buy some shelves for my storage unit. Appreciate the reading.

I have a hodgepodge of counters and shelving in my shop. Most was given to me. I’ve made some wooden shelves too. It all neatly stores my stuff. I’ve run out of space now that my son has 3 Cherokee’s and 2 F150’S to play with.

In our old house which had a shallower garage , I used the Fleximount overhead shelf, I’d use it again.I bought it at Home Depot. I never had the stones to hang off it though would support me. My goal with current garage is to not have any floor standing units. All hanging , if possible .Why didn’t the good old EZ shelf DIY make the cut? If you mount on study, and use enough brackets they hold alot of weight

i basically made boxes for my garage, 8′ by 1′ by 1′ and mounted em to my garage walls far up and with the fiberboard “bottom” as the back

I like the Gladiator series. A little pricey but they are toolless assembly where the cheaper versions have the fiddly nuts and bolts. Their hammered finish looks really good as well. For those in the US there’s more variety and availability as well.

Another plug for Gladiator shelves. They’re about as good as you can get without going to full blown commercial-grade heavy-duty shelving. For the vast majority of home users, the Gladiators will last nearly forever and work perfectly.

Watch out, too, on Edsal / Muscle Rack shelving, which is sold all over the place. Many units do not come with the post couplers. Without the couplers, the 2-piece vertical posts do not connect securely. And you’re forced to mount a shelf where the 2 post pieces connect. With the couplers, post connections are good, and you can mount shelves anywhere. Edsal / Muscle Rack *should* include these with all their racks, but don’t. And finding these coupler aftermarket is difficult.

The Gladiators have much more secure post connections, and shelf placement isn’t a potential problem.

“Just make sure to sell that box full of parts in the corner which fit a car you haven’t owned in a decade…”’ How’d you know?? -_-

You must be logged in to post a comment.